Post by somrat6islam222 on Feb 17, 2024 2:52:09 GMT -6
Waterproofing are not admissible as a support for the single-layer mortar. In the case of cellular concrete blocks, due to their excessive porosity, monolayers with low elastic modulus must be used, specifically prepared to guarantee adhesion in these conditions and, if recommended by the block or monolayer manufacturer, prepare the surface. using bonding bridges prior to placing the monolayer. In the design of the support, its homogeneity must be pursued . Heterogeneity is very common in current construction. The monolayer performs better the fewer different materials the façade has that will support it. The diversity of materials gives rise to different.
Different adhesion, different deformability and situations may arise in which the behavior of the monolayer is not optimal. On the façade there are pillars, lintels, shutter boxes and slab fronts , for which constructive solutions nts, plastics, thermal insulatorswill have to be found to minimize the effect of heterogeneity. In rehabilitation works we will find all types of supports. It is not unusual Phone Number List to find old buildings in which the supporting wall is made up of different types of ceramic bricks corresponding to different periods of construction, or areas with old windows bricked up due to changes in the use of the building. It is possible that some part of the façade has masonry walls and, above a certain height, it is made.
In all cases we must tend towards homogeneity of the support. It will be necessary to plan for regularization of the entire surface with an appropriate base material, which can be provided by the manufacturer of the monolayer, or resort to prior plastering of the entire surface of the support in the traditional way. This action will also allow the flatness of the support to be regularized, another important aspect in the application of the monolayer. There are often situations in which there are old continuous coverings, which in some areas of the façade have deteriorated and in others not. In these cases it is advisable to remove the entire coating. The option of removing only the most degraded parts.
Different adhesion, different deformability and situations may arise in which the behavior of the monolayer is not optimal. On the façade there are pillars, lintels, shutter boxes and slab fronts , for which constructive solutions nts, plastics, thermal insulatorswill have to be found to minimize the effect of heterogeneity. In rehabilitation works we will find all types of supports. It is not unusual Phone Number List to find old buildings in which the supporting wall is made up of different types of ceramic bricks corresponding to different periods of construction, or areas with old windows bricked up due to changes in the use of the building. It is possible that some part of the façade has masonry walls and, above a certain height, it is made.
In all cases we must tend towards homogeneity of the support. It will be necessary to plan for regularization of the entire surface with an appropriate base material, which can be provided by the manufacturer of the monolayer, or resort to prior plastering of the entire surface of the support in the traditional way. This action will also allow the flatness of the support to be regularized, another important aspect in the application of the monolayer. There are often situations in which there are old continuous coverings, which in some areas of the façade have deteriorated and in others not. In these cases it is advisable to remove the entire coating. The option of removing only the most degraded parts.